Quick tip: securing servo extensions

 If you plan to be doing any work inside of your plane that is not easily accessible, this would be a good thing to put on your tip list. MAKE SURE to put a zip tie around the plug to prevent it from coming undone! I have had to rip apart several wing designs before I figured this trick out. First, slide the zip tie between the positive and negative wires next to the plug. (I don't usually put the tie next to the signal lead as it might mess with the signal flow)

... Pull the tie though the other side of the plug...

 ...zip it shut...

 ...pull it tight...

...and you're done!

 Quick right? Two quick things to note:  DON'T over tighten the zip tie, as this might damage the plug. Also, you might not want to cut the zip tie once you are done: you can use it to pull on instead of the wires.

STATIK

StatiK Store!!!!!!!

The StatiK RC store is now live!!! Nothing is for sale yet, but feel free to check it out and give me your feed back here.

STATIK