Coming up......

 My next project will be the RCAPT Trainer out of foam board! STAY TUNED for the RCAPT Trainer!
A build log will be posted......

Mods for the HK Idol are here!

 

 

 

 

This is the landing gear I designed: sandwich the landing gear wire between popsicle sticks and Zip tie them together...DIY MEGA :)

 

 

 

I traced out the tail fin and cut it out of Foam board

 

 

 

I used the same technique for the wing: I traced it out. I made it 3D by putting a 50% score cut down the middle, adding the base, Then adding a spar...also made of foam. I also like the non-stall Wingtips. Wing design by me!

 

 

Here are the electronics (scavenged from another plane)

 

 

 

All together now!

 

 

Looks cool with balsa and foam put together!

Please comment if you liked this article and I will do more like it!

High Flyin with the Bixler2

getting ready for FPV!

dont you love loss of signal?

                                                   
                                                     Like a boss!.......or a banana.....